ATEX A37 Vacuum System With NEW Safety Locking System For Poles And End Tools

Description

Make short work of vacuuming in Zone 22 environments with the ATEX A37, now including the BRAND NEW Safety Locking System on all ATEX Suction Poles and End Tools!

Zone 22 is an environment where combustible dust can occur, including manufacturing and storage. Flammable dust, powers and gases create a potentially explosive atmosphere when they become airbourne.

The ATEX A37 is approved for M-Class Dust and Zone 22 environments. The brushless induction motor is frictionless, minimising operational heat and static charge. This brushless feature also reduces wear and tear, menaing less maintenance is required- ideal for sealed unit.

Additionally the pull-clean filter lets you clean the system whilst running, making cleaning with the ATEX A37 efficient and effective.

NEW Safety Locking System Anti-Static Suction Poles and End Tools:

With these new suction poles and accessories, you can bring out-of-sight spaces within reach! With the extra security of the Safety Locking System, you can remove dust from all high spaces- including high ledges, air vents, beams and piping!

Suitable for: Both M-class dust and ATEX Zone 22 environments

Key Features:

• Build-in FlowSensor and acoustic warning signal monitors air speed
• Brushless long life EC motors for ignition source-free performance
• Washable PET fleece filter with minimum 99.9% filtration efficiency
• Approved for cleaning and dust extraction in ATEX Zone 22 environments with explosive dust
• Push&Clean filter cleaning system to increase efficiency and reduce downtime
• M-class hazardous dust approval

Vacuum specification:

• Air flow Movement: 3200 Litres per minute (Maximum)
• Motor wattage: 1400 max
• Decibel level: 60
• Container capacity: 37 Litres
• Mains connection: 240 volt
• Height: 75cm
• Weight: 13kg
• Power Cable Length: 7.5 metres
• L45 x W44 x H75

Included as Standard in each Antistatic Kit

• Industrial vacuum (Nilfisk ATTIX 40 TYPE 22)
• Industrial vacuum (Nilfisk ATTIX 40 TYPE 22)
• NEW Safety Locking System Feature ATEX 1.5 Metre Suction Pole
• NEW Safety Locking System Carbon fibre 155-degree tool holder
• NEW Safety Locking System Carbon fibre 65-degree tool holder
• NEW Safety Locking System Carbon fibre straight hose cuff connecter
• 5 metres of 38mm Anti-Static flexi pick-up hose.
• 3 x assorted internal end tools.
• Anti-Static pole carrying bag.
• NEW Anti-Static Accessory Bag
• Stainless steel bend tube (for low-level cleaning)
• Anti-Static rubber crevice tool (for low-level cleaning)

Choose the Height You Wish to Reach

• 6 Metre Reach (20ft)
• 9 Metre Reach (30ft)
• 12 Metre Reach (40ft)

Risk Assessment (ATEX)

If this vacuum cleaner is used for collecting flammable / explosive materials or within a zoned area classified under the ATEX 137 Directive 1999/92/EC then a risk assessment must be carried out by a competent person to verify the suitability of the application.

The risk assessment will be the responsibility of the customer / end user and should take into account but not be limited to the characteristics of the material being collected such as:

• Spark ignition sensitivity
• Hot surface ignition sensitivity (cloud)
• Hot surface ignition sensitivity (layer)
• Explosion severity
• Burning behaviour
• Thermal instability
• Chemical instability
• Static electricity generation
• Impact of collected material
• The ATEX certification code for the appliance being assessed. (See the rating plate on the machine).